TY - JOUR
T1 - Functional multilayered capacitor pixels printed by picosecond laser-induced forward transfer using a smart beam shaping technique
AU - Rapp, Ludovic
AU - Constantinescu, Catalin
AU - Larmande, Yannick
AU - Diallo, Abdou Karim
AU - Videlot-Ackermann, Christine
AU - Delaporte, Philippe
AU - Alloncle, Anne Patricia
N1 - Publisher Copyright:
© 2015 Elsevier B.V. All rights reserved.
PY - 2015/4/1
Y1 - 2015/4/1
N2 - The printing of multilayered pixels using single picosecond laser pulses is investigated by using an improved laser-induced forward transfer (LIFT) technique. Micrometric low-k dielectric capacitors of hybrid organic polymer (parylene-C) and silver thin films have been transferred on laser-printed pads of annealed silver nanoparticles (AgNP) paste. This printing technique allows to design and print directly on virtually any substrate, in order to make the capacitors directly interface with other components, such as transducers or sensing devices, and which are further used for improving or complementing the characteristics of these devices. This study focuses on the use of the optimized LIFT technique using a double mask setup, i.e. smart beam shaping (SBS) in the picosecond laser pulse regime. The purpose is to optimize the energy repartition of the Gaussian beam on the thick multilayer donor by using a beam profile with increased intensity at the edges and low intensity in the center. This allows to keep the incoming irradiation fluence on the donor layer as low as possible in the centre area, and thus preventing the multilayer pixels from damage induced by laser irradiation. Electrical investigations of the SBS-LIFT printed micro-capacitors demonstrate that they are fully functional and stable over time, with capacities in the pF range.
AB - The printing of multilayered pixels using single picosecond laser pulses is investigated by using an improved laser-induced forward transfer (LIFT) technique. Micrometric low-k dielectric capacitors of hybrid organic polymer (parylene-C) and silver thin films have been transferred on laser-printed pads of annealed silver nanoparticles (AgNP) paste. This printing technique allows to design and print directly on virtually any substrate, in order to make the capacitors directly interface with other components, such as transducers or sensing devices, and which are further used for improving or complementing the characteristics of these devices. This study focuses on the use of the optimized LIFT technique using a double mask setup, i.e. smart beam shaping (SBS) in the picosecond laser pulse regime. The purpose is to optimize the energy repartition of the Gaussian beam on the thick multilayer donor by using a beam profile with increased intensity at the edges and low intensity in the center. This allows to keep the incoming irradiation fluence on the donor layer as low as possible in the centre area, and thus preventing the multilayer pixels from damage induced by laser irradiation. Electrical investigations of the SBS-LIFT printed micro-capacitors demonstrate that they are fully functional and stable over time, with capacities in the pF range.
KW - Laser printing
KW - LIFT
KW - Multilayer
KW - Parylene-C
KW - SBS
KW - Silver nanoparticles paste
UR - http://www.scopus.com/inward/record.url?scp=84922808336&partnerID=8YFLogxK
U2 - 10.1016/j.sna.2015.01.020
DO - 10.1016/j.sna.2015.01.020
M3 - Article
AN - SCOPUS:84922808336
SN - 0924-4247
VL - 224
SP - 111
EP - 118
JO - Sensors and Actuators, A: Physical
JF - Sensors and Actuators, A: Physical
ER -