Preparation and characterization of 33S samples for 33S(n,α)30Si cross-section measurements at the n_TOF facility at CERN

    Research output: Contribution to journalArticlepeer-review

    4 Citations (Scopus)

    Abstract

    Thin 33S samples for the study of the 33S(n,α)30Si cross-section at the n_TOF facility at CERN were made by thermal evaporation of 33S powder onto a dedicated substrate made of kapton covered with thin layers of copper, chromium and titanium. This method has provided for the first time bare sulfur samples a few centimeters in diameter. The samples have shown an excellent adherence with no mass loss after few years and no sublimation in vacuum at room temperature. The determination of the mass thickness of 33S has been performed by means of Rutherford backscattering spectrometry. The samples have been successfully tested under neutron irradiation.

    Original languageEnglish
    Pages (from-to)142-147
    Number of pages6
    JournalNuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
    Volume890
    DOIs
    Publication statusPublished - 11 May 2018

    Fingerprint

    Dive into the research topics of 'Preparation and characterization of 33S samples for 33S(n,α)30Si cross-section measurements at the n_TOF facility at CERN'. Together they form a unique fingerprint.

    Cite this