Quasi-static strain sensing using molecular spectroscopy

Timothy T. Lam, Jong H. Chow, Daniel A. Shaddock, Ian C. Littler, Gianluca Gagliardi, Malcolm B. Gray, David E. McClelland

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

    Abstract

    Steady developments in cost and reliability in fiber optic sensors have seen an increase of their deployment in numerous monitoring and detection applications. In high-end applications, greater resolution is required, especially in systems where the environment is quiet, but the signal is weak. In order to meet these requirements the most dominant noise source, laser frequency noise, must be reduced. In this paper we present a quasi-static strain sensing referenced to a molecular frequency reference. A DFB CW diode laser is locked to a fiber Fabry-Perot sensor, transferring the detected signals onto the laser frequency and suppressing laser frequency noise. The laser frequency is then read off using an H13C14N absorption line. Phase modulation spectroscopy is used to both lock the laser to the sensor and read off the signals detected by the sensor. The technique is capable of resolving signals below 1 nanostrain from 20 mHz, reaching a white noise floor of 10 picostrain at several Hz.

    Original languageEnglish
    Title of host publication21st International Conference on Optical Fiber Sensors
    DOIs
    Publication statusPublished - 2011
    Event21st International Conference on Optical Fiber Sensors - Ottawa, ON, Canada
    Duration: 15 May 201119 May 2011

    Publication series

    NameProceedings of SPIE - The International Society for Optical Engineering
    Volume7753
    ISSN (Print)0277-786X

    Conference

    Conference21st International Conference on Optical Fiber Sensors
    Country/TerritoryCanada
    CityOttawa, ON
    Period15/05/1119/05/11

    Fingerprint

    Dive into the research topics of 'Quasi-static strain sensing using molecular spectroscopy'. Together they form a unique fingerprint.

    Cite this