The study of thermal silicon dioxide electrets formed by corona discharge and rapid-thermal annealing

Teng C. Kho, Simeon C. Baker-Finch, Keith R. McIntosh

    Research output: Contribution to journalArticlepeer-review

    34 Citations (Scopus)

    Abstract

    A silicon dioxide (SiO2) electret passivates the surface of crystalline silicon (Si) in two ways: (i) when annealed and hydrogenated, the SiO2-Si interface has a low density of interface states, offering few energy levels through which electrons and holes can recombine; and (ii) the electret's quasipermanent charge repels carriers of the same polarity, preventing most from reaching the SiO2-Si interface and thereby limiting interface recombination. In this work, we engineer a charged thermal SiO2 electret on Si by depositing corona charge onto the surface of an oxide-coated Si wafer and subjecting the wafer to a rapid thermal anneal (RTA). We show that the surface-located corona charge is redistributed deeper into the oxide by the RTA. With 80 s of charging, and an RTA at 380 °C for 60 s, we measure an electret charge density of 5 × 1012 cm -2, above which no further benefit to surface passivation is attained. The procedure leads to a surface recombination velocity of less than 20 cm/s on 1 Ω-cm n-type Si, which is commensurate with the best passivation schemes employed on high-efficiency Si solar cells. In this paper, we introduce the method of SiO2 electret formation, analyze the relationship between charge density and interface recombination, and assess the redistribution of charge by the RTA.

    Original languageEnglish
    Article number053108
    JournalJournal of Applied Physics
    Volume109
    Issue number5
    DOIs
    Publication statusPublished - 1 Mar 2011

    Fingerprint

    Dive into the research topics of 'The study of thermal silicon dioxide electrets formed by corona discharge and rapid-thermal annealing'. Together they form a unique fingerprint.

    Cite this